XF Series Fluidizing Dryer

Negotiable 1 Set (MOQ)
Min. Order:
1 Set
Port:
Shanghai, China
Payment Terms:
T/T

Last Login Date:

Nov 08, 2024

Business Type:

Manufacturer/Factory, Trading Company

Main Products:

Drying Machine, Hot Air Furnace, Hot Blast Stove, Drying Equipment

Find Similar Products
US$28,000.00
2 Sets (MOQ)

Product Description

Company Info

Basic Info.

Model NO.
XF Series
Origin
China

Product Description

Descriptions
A fluidized bed dryer consists of air filter, heater, fluidized bed, rotating segment feeder, cyclone separator , bag dust remover, high press centrifugal fan and stage for operation. According to different characters of different materials to be dried, the dryer can be equipped with both cyclone separator and bag dust remover or with either of them. Generally speaking, for those pellet materials with a large specific gravity, only a cyclone separator is needed. And for those granule or powder materials with a small specific gravity, a bag dust remover is needed and so is a pneumatic conveying device if possible. The dryer can also be equipped with a rotating segment feeder if required.

Applications
This fluidized bed dryer is suitable for drying pellet or granule materials such as raw materials for medicine, pellets, traditional Chinese medicine drink granules in pharmaceutical industry; plastic resin, citric acid and other powder or granule materials in chemical industry and drink granules, corn plumule, feed in food industry. The most suitable diameter of the materials is 0.5-3mm.

Features
This fluidized bed dryer can achieve automation and continuous drying process. It has a high drying speed and a low temperature and the product quality can be ensured, meeting GMP requirements. The heating resource can be steam, electricity or furnace.

Sketch of structure


Principle of work
Granule or pellet solid materials are fed into the fluidized bed dryer through the feeder. Filtrated clean air is heated and charged onto the bottom of the fluidized bed to contact with the solid materials on the distributing plate, where fluidization can be reached and the heat exchange between solid and air can be achieved. After being dried, the products are discharged from the outlet. Waste gas is discharged from the top of the fluidized bed, and powder materials are recovered by the cyclone separator or bag dust remover.

Instructions for installation
Fluidized bed, cyclone separator and cloth bag dust extractor should be placed on flat concrete ground without any screws on foundation. The air blower may be installed indoors or outdoors with foundation and screws. The plane design can be partly adjusted in accordance with the building conditions. No air should leak from the air pipe system so as not to influence the drying efficiency.

Technical parameters
TypeBed area    (m2)Drying capacity (water kg/h)Air blowerAir intake temp(ºC)Material discharge temp(ºC)Heating energy consumption
Power(kw)Air pressure (Pa)Air volume (m3/h)Steam (kg/h)Elec power (kw)
XF-10A0.310~155.54900230060~14040~805030
XF-10B0.3438002300
XF-20A0.520~257.55000310010060
XF-20B0.55.535003100
XF-30A1.030~45156000420015090
XF-30B1.01147004200
XF-50A2.050~802274006000250150
XF-50B2.018.559006000

1.Drying capacity : when drying sweet-sour plum crystals, it should be measured on the basis the primary moisture contents of 20% and final moisture contents of 5% and the air intake temperature at 1300ºC. The dry capacity of other materials should be based on different drying conditions.
2.Heating energy consumption: Steam or electric power may be used separately.
 
Send your message to this supplier
Mr. Haixin Xu

Post a Sourcing Request Now

People who liked this also liked