Basic Info.
Product Description
DescriptionsMostly the machine is used in per burning of rigid magnet oxygen. Pulverized fodder; it is also suitable for the cement, metallurgy and Chemical industry. It is made up of main kiln body and supporting drive set cooling pipe and supporting drive set, fuel system, electricity control secondary air set, exhaust dust set and warm-up kiln body etc. The machine has function like: give an alarm for over temperature, give an alarm for over loading, auto control for working temperature, oxygen atmosphere is adjustable in the kiln etc.Principle of workWhen the damp raw material is fed from one terminal, it is turned over through blades that are distributed inside the cylinder and will be distributed uniformly in the drier and contact fully with the countercurrent hot air In this way, the process of heat conduction is increased. During the period of dry, under the effect of incline blades and hot air stream raw material can be moved to the star section of drier and discharged from discharged form discharging valve.Features1.High in the extent of mechanization and strong in production capacity.2.The resistance for fluid passing through the cylinder is small. The consumption of power and energy is low.3.It has strong adaptability to the properties of raw material. The operation is stable. The cost of operation is cheap.4.The uniformity of dried substance is good.ApplicationIt is suitable for drying the following raw materials. They are granules with heavy specific gravity in chemical industry, mine industry, metallurgy industry such as ore slag, coal, metallic powder, phosphorus fertilizer, ammonia sulfate. Moreover for raw materials that are granules with special requirements, such as HP vesicant, less light calcium carbonate, active white earth, magnetic powder, graphite, lag of medicine and raw materials that need low temperature and in batch continuously.Technical parameters| Item(mm) | Productive capacity(t/h) | Revolution (r/min) | Motor power(kw) | Install angle(°) | Temp.of final |
| φ1.0×5.0 | 0.5~1.2 | 0.6~6 | 4 | 3~5 | ≤1.5% |
| φ1.2×6~10 | 1.5~3 | 0.6~6 | 5.5 | 3~5 | ≤1.5% |
| φ1.5×12~18 | 3~5.5 | 0.6~6 | 15 | 3~5 | ≤1.5% |
| φ1.8×12~18 | 5~6.5 | 0.6~6 | 18.5 | 3~5 | ≤1.5% |
| φ2.2×12~22 | 7~12 | 0.6~6 | 22 | 3~5 | ≤1.5% |
| φ2.4×15~20 | 9~15 | 0.6~6 | 30 | 3~5 | ≤1.5% |
| φ3.0×25 | 16 | 0.6~6 | 55 | 3~5 | ≤1.5% |
| Item | Type |
| direct heating clockwise way | direct heating clockwise way | direct heating counterclockwise way | direct heating counterclockwise way | compound heating | compound heating |
| Kinds of raw material | Ore | HPvesicant | Slag of blast furnace | Ammonium sulphate | Phosphorus fertilizer | Coal |
| Amount to be treated(kg/h) | 1000 | 466 | 15000 | 20000 | 12000 | 5000 |
| Primary moisture(%) | 30 | 13 | 6 | 1.5 | 5 | 6.5 |
| Final moisture(%) | 15 | 0.3 | 1 | 0.1 | 0.1 | 0.1 |
| Average diameter(mm) | 6.5 | 0.05 | 4.7 | 0.5~0.7 | 0.5 | 5 |
| Thickness of raw material(kg/m3) | 770 | 800 | 1890 | 1100 | 1500 | 750 |
| Amount of hot air(m3/kg) | 39000 | 5400 | 10750 | 9800 | 6500 | 16000 |
| Temperature of air at inlet(ºC) | 600 | 165 | 500 | 180 | 650 | 570 |
| Temperature of raw material at outlet(ºC) | | 42 | 100 | 70 | 80 | 75 |
| Way of heating | Gas | Steam,electric heating | Heavy oil | coal fuel hot air furnace | Heavy oil | Heavy oil |
| Filling confficient | | 6.3 | 7 | 7.5 | 7.8 | 18 |
| Revolution( r.p.m) | 4 | 4 | 3.5 | 3 | 4 | 2 |
| Gradient(m/m) | 0.04 | 0.005 | 0.03 | 0.05 | 0.05 | 0.043 |
| Quantity of stirring-up rake | 12 | 24 | 12 | 22 | Outer of inner cylinder 8 Inner of outer cylinder l6 | Outer of inner cylinder 6 Inner of outer cylinder l2 |
| diameter of dryer(m) | 2 | 1.5 | 2 | 2.3 | Outer of inner cylinder 2 Inner of outer cylinder 0.84 | Outer of inner cylinder 2.4 Inner of outer cylinder 0.95 |
| Length of dryer(m) | 20 | 12 | 17 | 15 | 10 | 16 |
| Driving Power(kw) | 22 | 7.5 | 15 | 11 | 11 | 15 |
Address:
No. 10 Dong Qing Road, Hudai Industrial Park, Binhu District, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}